How to Get Hardwood Floors Streak Free

Full article with thanks to https://www.scrubbi.com/how-to-get-hardwood-floors-streak-free-2/

BEFORE YOU START

Hardwood floors are very popular to have in a home, but to get them shiny and streak-free is a little difficult for some. But with the right tools combined with an excellent cleaning technique, you can get those floors to shine like you’ve always wanted.

But before we even think about getting started, we need to do a little bit of research into the type of hardwood you have.
 

DETERMINE THE TYPE OF HARDWOOD FINISH

The first thing you want to do is determine the type of finishing your hardwood floor has. If your floor has a modern finish, it can be wet-mopped. If it has an older finish or has been waxed, then it requires a gentle damp-mopping.

Prefinished floors are the easiest to recognize since every board has beveled edges. If your floor isn’t glossy, then you have a stained or unfinished floor.
If your floor shines, some testing is required. To determine whether your hardwood floor contains wax, moisten extra-fine steel wool and rub it on a discreet area. If you see a light gray smudge appear on the wool that means you have a wax finish.

If there is no smudge, then place a few drops of water on the most high traffic area of the floor. If you have a modern seal, the water will remain beaded after several minutes. If the water soaks up or darkens the wood, then you have an older seal or a poorly-finished one.

If you’re unsure about the type of flooring you have in your home, then always choose the gentler method of cleaning your hardwood floor.
 

CLEANING DIFFERENT TYPES OF HARDWOOD FLOORS

A.Cleaning hardwood with a modern surface seal

Tips

Oil, wax, and furniture spray should NOT be used. Oil leaves residue that will hold dust and dirt while furniture spray makes the floor very slick (very dangerous). Wax creates problems in the case you ever decide to recoat your floor.

Instead, use a liquid dishwashing soap and water. Liquid dishwashing soap is great to use since it’s so mild.

Using distilled water is highly recommended. It should be available at your supermarket, and is inexpensive. Using distilled water is the secret to streak-free floors!

Method

  1. Sweep the floor
    Sweep the floor with a soft-bristled broom. You must broom first to get rid of large particles like sand, small rocks, or grit that may scratch your floor if caught under a mop. You can also vacuum the floor, but make sure that the attachment has the soft bristles to prevent scratching.
  2. Mop
    Mop the floor using the water and soap solution. Mop with the grain of the wood and DO NOT soak the floor. Work as quickly as you can and make sure to change the water when it darkens.
  3. Spot-Clean
    With a soft micro-fiber cloth, dip into the water and soap solution and spot-clean grimy areas.
  4. Mop up the soapy water
    Rinse the mop in clean water and squeeze is thoroughly. Working quickly, start drying the floor with the mop. This doesn’t need to be a perfect job because you still have to rinse the floor ahead.
  5. Rinse
    Rinse and wash the mop one more time. Clear out the water in the bucket and fill it up with clean water or store-bought distilled water (recommended!). Rinse and clean the floor once again with the distilled water.
  6. Buff
    This is the final step! Using a fresh mop, or on your hands and knees with a micro fiber cloth, buff the floor dry.

 
B.Cleaning all other hardwood surface types
Tips

Many of the same guidelines apply for this one as well. Do not add soap to the water, use a mop that has been wrung nearly dry and be very gentle!

Method

  1. Sweep the floor
    This step is the same as the other method. Sweep the floor with a soft-bristled broom or use a vacuum.
  2. Dampen the mop
    WFill a bucket with water. Of course we suggest using distilled water for a streak-free clean! Dip the mop into the water and wring it thoroughly. Working with the grain, use the damp mop and run it over the floor. Change the water when you see it darkening.
  3. Spot-Clean
    Using a soft cloth, spot-clean the floor.
  4. Dry and Buff
    With a terry cleaning cloth, buff and dry the floor.

While cleaning, be sure to take off your shoes and work in socks. These methods on how to clean a hardwood floor should leave your floors looking amazing and….STREAK-FREE!

Full article with thanks to https://www.scrubbi.com/how-to-get-hardwood-floors-streak-free-2/